Nyt on semmoinen video että oksat pois!
200 tuhatta on jo nähnyt tämän, oletko sinä?
vehe leijuu jo videon 3:30 kohdassa
Now there are some facts that don't "fit" the Tesla theory here. The shape doesn't resemble a classic Tesla Flying machine: it is of "open" design and has no cage to absorb or bring in the tubes of force apart from the discs and a basic structure. The High voltage wire seems very thin, 15KV wires are 1/4 of an inch thick, 400KV (which is a small/medium TC) would be causing skin effect and would need to be much thicker than shown. Merely attaching a long wire to the output of a TC would "untune" it as it behaves as an inductive load so it would be very difficult to tune it. Maybe his TC puts out much less than 100KV - he doesn't mention the specific characteristics. He holds and sometimes touches the supports while the device is operating so the HV must lead to an insulated area or the external legs are isolated (they are pointy, they would be accumulating all the charge so I doubt they are connected to the HV source). The device is apparently silent and makes no corona sound - maybe this is normal (lifters hiss a lot, due to the type of power source and corona, but if a clean power source is used, practically nothing is heard).
Täällä joku englanninkielinen näkyy kommentoivan ylläesitettyä videota:
Näyttäs olevan niin että sähköstaattinen kenttä pannaan kestomagneettinapeilla pyörimään, tai siis peltihässäkässä sisällä oleva pikku moottori pyörittää levyä, johon on pultattu 6 kpl jotain magneettia kehälle, sitten pienellä Teslamuuntajalla tuotettu sähköstaattinen kenttä saatetaan pyörivään liikkeeseen, syy miksi peltihässäkkä ei putoa heti maahan kun johto irroitetaan akun navasta, johtunee siitä että magneetit jää vielä pyörimään toviksi, systeemi putoaa maahan rämähtäen, kun kineettistä energiaa sisältävä pyörimisliike hiipuu riittävästi.