Tuollahan vasta erikoisia juttuja on, kapanadzen replikointia yrittävät, mutta ovatkin löytäneet jotakin perin mielenkiintoista ferriiteistä, Ferriitti isotoopin Fe56 muuttuminen pikkuhiljaa Fe54, ja siitä välistä lähtee poweria 50 kilowattia 2400 tunnin ajan/per kilo.
http://www.energeticforum.com/renewable ... on-16.htmlja joku selostus lontoon murteelle, en tiedä miten nää liittyy toisiinsa?
Here is the translation of the Russian texts on the picture:
L1-L2 coils have 100 turns of 1 mm wire, wound like in inverter transformer
L3 coil has 20 turns of 2 mm wire, 4 layers with 5 turns in each layer
L4 coil has 150 turns of 2 mm wire, 3 layers with 50 turns in each layer
Transistors are the high power transistors
Positions of the coils on the core which is a pile of 25 ferrite rings μ=600, glued with superglue, I think [CrazyAlex] that the mark of ferrite is not important, but it need to contain Fe56 :
Ferrite is chemical compounds of ferroxides Fe2O3
L1 L2 L3 L4
Task of L1-L2: to produce the alternate magnetic field with intensity of 0,5 Tesla
Task of L3: to furnish the electric field of 21 MHz frequency which the spark contains
Task of L4: to pick up the energy of transmutation process of transformation of Fe56 isotope to Fe54 isotope
How to tune the circuit:
1.Be sure that the transistors of the inverter work. Be sure that L1-L2 coils produce the magnetic field with intensity not less than 0.5 Tesla. Use some device to do this or by experience.
2.By varying the spark gap try to find the maximum output from L4
3.The diodes of rectifier need to be the high current diodes
4.The interrupters Sb1, Sb2 need to be the high current ones
From where the energy picked up:
During the process of transmutation of Fe56 isotope to Fe54 isotope the energy of two neutrons appeared is released like very strong magnetic field.
Note:
1.It's possible that this device is not in working regime immediately, it depends on ferrite material.
2.After complete transmutation of Fe56 isotope to Fe54 isotope you need to change the ferrite core. According to Czechoslovak patent one iron rod of Fe56 of 1 kg with 50 KW load can be used during 2400 hours.
Thanks!
1.To CrazyAlex for his theory...
2.To Toptamburg for his experience and his remarks that the magnetic field need to be not less than 0.5 Tesla, and that the spark contains the electric field of 21 MHz frequency
3.Admin of this forum...
4.To SR for his advices
5.To one Czechoslovak firm for the patent
And for others who took place in the experiences
http://www.youtube.com/watch?v=PFZ5BXq8jk0ja tässä yllämainitussa linkissä joku on jo onnistunut replikoimaan Kapanadzen systeemin.